A raised floor (also raised flooring, access floor(ing), or raised access computer floor) provides an elevated structural floor above a solid substrate (often a concrete slab) to create a hidden void for the passage of mechanical and electrical services. Raised floors are widely used in modern office buildings, and in specialized areas such as command centers, IT data centers and computer rooms, where there is a requirement to route mechanical services and cables, wiring, and electrical supply. Such flooring can be installed at varying heights from 2 inches (51 mm) to heights above 4 feet (1,200 mm) to suit services that may be accommodated beneath. Additional structural support and lighting are often provided when a floor is raised enough for a person to crawl or even walk beneath.

In the U.S., underfloor air distribution is becoming a more common way to cool a building by using the void below the raised floor as a plenum chamber to distribute conditioned air, which has been done in Europe since the 1970s. [1] In data centers, isolated air-conditioning zones are often associated with raised floors. Perforated tiles are traditionally placed beneath computer systems to direct conditioned air directly to them. In turn, the computing equipment is often designed to draw cooling air from below and exhaust into the room. An air conditioning unit then draws air from the room, cools it, and forces it beneath the raised floor, completing the cycle.



This type of floor consists of a gridded metal framework or substructure of adjustable-height supports (called "pedestals") that provide support for removable (liftable) floor panels, which are usually 2×2 feet or 60×60 cm in size. The height of the legs/pedestals is dictated by the volume of cables and other services provided beneath, but typically arranged for a clearance of at least six inches or 15 cm.

The panels are normally made of steel-clad particleboard or a steel panel with a cementitious internal core, although some tiles have hollow cores. Panels may be covered with a variety of flooring finishes to suit the application, such as carpet tiles, high-pressure laminates, marble, stone, and antistatic finishes for use in computer rooms and laboratories. When using a panel with a cement top surface the panels are sometimes left bare and sealed or stained and sealed to create a tile appearance and save the customer money. This bare application is used most often in office area, hallways, lobbies, museums, casinos, etc.

Many modern computer and equipment rooms employ an underfloor air distribution to ensure even cooling of the room with minimal wasted energy. Conditioned air is provided under the floor and dispersed upward into the room through regularly spaced diffuser tiles, blowers or through ducts directed into specific equipment. Automatic fire protection shutoffs may be required for underfloor ventilation, and additional suppression systems may be installed in case of underfloor fires.

Server cabinet aisle on raised floor with cooling panels

Panel lifter

One-cup suction lifter

To remove panels, a tool with a suction cup on the end (referred to as a "floor puller", "tile lifter", or "suction lifter") is used. A hook-and-loop lifter may be used on carpeted panels.

Structural problems

Beneath a raised floor

Structural problems, such as rocking panels and gaps between panels, can cause significant damage to equipment and injury to personnel. Regular inspections for the structural integrity of a raised floor system can help to identify and mitigate problems.

Equipment and floor damage can happen when using flooring that does not meet load demands. Load ratings range from 1,000 pounds to 2,5000 pounds. Higher panels can be used on heavier area of a floor where as lower panels can be used on lighter areas.[2]

Many such problems can be attributed to sub-par installation. During installation, attention should be paid to the condition of the subfloor, which should be clean of debris and should be as level as possible. The walls surrounding the raised floor should be as square as possible to minimize the need for cutting raised floor panels and to minimize rocking panels and gaps.[3]

Cooling load implications

Perforated cooling floor tile

The installation of a raised floor system can change the thermal behavior of the building by reducing the interaction between the heat gains and the thermally massive concrete slab.[4] The raised floor serves as a separation between the room and the slab. Energy simulations of an office building located in San Francisco showed that the mere presence of the raised floor affects the zone cooling load profile and tends to increase the peak cooling load. When carpeting is present the negative impact of the raised floor on zone peak cooling load may be reduced.[4]

Telecommunications data center applications

Raised floors available for general purpose use typically do not address the special requirements needed for telecommunications applications. [5]

The general types of raised floors in telecommunications data centers include: stringerless, stringered, and structural platforms; and, truss assemblies.

  • Stringerless raised floors — an array of pedestals that provide the necessary height for routing cables and also serve to support each corner of the floor panels.
  • Stringered raised floors — a vertical array of steel pedestal assemblies (steel base plate, tubular upright, and a head) uniformly spaced on 2-foot centers and mechanically fastened to the concrete floor.
  • Structural platforms — members constructed of steel angles or channels that are welded or bolted together to form an integrated platform for supporting equipment.
  • Truss assemblies — utilizing attachment points to the subfloor to support a truss network on which the floor panels rest. The truss has high lateral strength and transfers lateral loads to the subfloor with less strain than possible with a vertical pedestal assembly.

A telecommunications facility may contain continuous lineups of equipment cabinets. The most densely populated installation configuration would consist of rows of continuous 2-foot-wide equipment cabinets with aisles that separate 2-foot-wide adjacent rows. This lineup configuration is considered to be the most densely populated in terms of square foot area and, therefore, the largest floor load anticipated for a raised floor system. Considering prorated aisle space, a single equipment cabinet will then occupy an 8-square foot (0.74-m2) floor area (4 square feet for the cabinet and 4 square feet of aisle).

The data center can be located in remote locations, and is subject to physical and electrical stresses from sources such as fires and from electrical faults.

The environment drives the installation methods for raised floors, including site preparation, cable and cable racking, bonding and grounding, and fire resistance. The actual installation should be in accordance with the customer’s practices.[6][7]

Many office buildings now use access flooring to create more flexible and sustainable spaces. When underfloor air is designed into a building from the start of the project, the building can be less expensive to build and less expensive to operate over the life of the building. Underfloor air requires less space per floor, thereby reducing the overall height of the building, which in turn reduces the cost of the building facade. The blowers and air handlers required for underfloor air are much smaller and require less energy, since hot air rises naturally through the space as it comes in contact with people and equipment that warm the air and it rises to the ceiling. Additionally, when buildings are designed to combine modular electrical, modular walls, and access floor, the space within the building can be reconfigured in a few hours, as compared to historical means of demolishing walls and drilling holes in the floor to route electrical and other services. As more companies construct or renovate buildings to meet LEED (Leadership in Energy & Environmental Design) underfloor air and access floor usage will continue to grow. The USGBC (United States Green Building Council) states that approximately 25% of all new buildings are built to meet the LEED requirements today.[when?]

Because the flooring tiles are rarely removed once equipment has been installed, the space below them is seldom cleaned, and fluff and other debris settles, making working on cabling underneath the flooring a dirty job. Smoke detectors under the raised floor can be triggered by workers disturbing the dust, resulting in false alarms..

สำหรับแสดงปุ่ม add สินค้าแนะนำ





บริษัทฯก่อตั้งขึ้นเมื่อปี พ.ศ.2543 เป็นผู้ให้การออกแบบ ติดตั้ง งานสแตนเลสชนิดต่างๆ เช่นถังผสม ระบบงานท่อสแตนเลส ถังไซโล และงานตกแต่ง เช่น ราวบันได ราวกันตก และอื่นๆที่ทำจากสแตนเลส ควบคุมงานโดยทีมงานผู้เชี่ยวชาญทางด้านสแตนเลสและอลูมิเนียมโดยเฉพาะ  ทำให้เราได้รับความไว้วางใจจากทั้งหน่วยงานภาครัฐ ภาคเอกชน รัฐวิสาหกิจ และบริษัทเอกชน อีกทั้งเรายังพร้อมให้บริการครอบคลุมพื้นที่ทั่วทั้งประเทศ
ต่อมาในปี พ.ศ.2552  บริษัทได้ขยายธุรกิจรับเหมาก่อสร้างและงานตกแต่ง โดยได้นำเข้าระบบพื้นยกสำเร็รูป (Raised Access Floors System) มาทำตลาดเพื่อตอบสนองความต้องการของลูกค้าและผู้ออกแบบ ซึ่งสามารถนำมาใช้สำหรับห้องคอมพิวเตอร์ ห้องเรียน ห้องไฟฟ้า ห้องควบคุมระบบ และพื้นที่สำนักงาน นอกจากนี้บริษัทฯยังมีสินค้าอื่นๆให้เลือกใช้ อทิ ESD TILE Anti-Static PVC, กระเบื้องยางลายไม้ ฯลฯ


ที่ตั้ง : 46/116 หมู่ 3 ถนนศรีสมาน บ้านใหม่ ปากเกร็ด นนทบุรี 11120
จังหวัด : นนทบุรี
รหัสไปรษณีย์ : 11120
ประเทศ : TH
โทรศัพท์ : 0971599875
แฟกซ์ : 025820762
โทรศัพท์มือถือ : 0814466714
อีเมลล์ : pornpimol.add@gmail.com
เว็บไซต์ : http://www.pec-thailand.com
แผนที่ :
พื้นยก access floor พื้นกระจก กระเบื้องยาง conductive รับทำประตู ประตูรั้ว ประตูรั้วสเตนเลส ประตูรั้วสแตนเลส ประตูสแตนเลส ออกแบบ ออกแบบตกแต่ง เฟอร์นิเจอร์สแตนเลส ราวบันได หุ้มเสาสแตนเลส